Configurable Class I and II medical power supplies meet curve B EMI
Configurable AC/DC power supplies in the XMS500 series by TDK-Lambda, offer both Class I and Class II (double insulated) construction.
All models are compliant to curve B radiated and conducted EMI, with more than 6dB margin, yet maintain a leakage current of less than 150-microA, says the company. The mechanical design and high operating efficiency ensure only 1m/s airflow is required for full load operation at 500W.
Certified to both medical and industrial safety standards, typical applications include home healthcare, hospital equipment, imaging and clinical diagnostic systems, although they can also be used in industrial, test and measurement and communications equipment. With a low 37mm profile the XMS500 can be easily incorporated into limited space environments, says TDK-Lambda.
The flexibility of XMS500 allows engineers to select from a range of options to optimise system design and cost. These include standby voltages, fan supply voltage, case options (including built-in, low audible noise, fan), remote on/off, AC fail and single or dual input fusing. Standard output voltages offered are 12, 24, 36 and 48V. Additional voltages and options are available.
The XMS500 series models will operate from an input of 90 to 264V AC, and is able to withstand 300V AC for five seconds. Operating temperature is up to +70 degree C, derating linearly above 50 degree C by 2.5% per degree C. The open frame models measure 102 x 180 x 37mm and the U channel measures 107 x 180 x 39.5mm.
All models are safety certified to IEC/EN/ES 60601-1, IEC/EN/UL 60950-1 with CE marking for the Low Voltage and RoHS2 Directives.
The XMS500 also complies with EN 55011 level B and EN 55032 level B conducted and radiated emissions (for both the Class I and II products), and meets the EN 61000-3-2 harmonics, IEC60601-1-2 Edition 4 and IEC 61000-4 immunity standards.
Input to output isolation is 4kV AC (2 x MOPP), input to ground isolation 1.5kV AC (1 x MOPP) and output to ground isolation is 1.5kV AC (1 x MOPP) making it suitable for both B and BF rated equipment.