Miniature DC/DC converter has 2 x MOOP compliance

Available with either a 12 or 24V DC 2:1 input voltage range and output voltages of 3.3, 5.0, or 12V DC, Murata’s surface mount MTC2 has a 3kV AC input to output isolation.

The 2W single output, regulated and isolated DC/DC converters measure 14.99 x 14.22 x 11.23mm (0.59 x 0.56 x 0.44inch) and complies with both the UL/EN 60950 reinforced insulation safety standard for use in commercial equipment and the ANSI/AAMI ES60601-1 medical safety specification with 2 x MOOP (Means of Operator Protection).

The output is regulated to ±0.5% of the nominal output voltage. An output voltage trim function permits adjustment of the output by ±10% to suit special applications. No additional regulation components are required, says the company. The 2:1 input range accommodates applications where there may be wide deviations of the input voltage. A remote on/off pin is available to aid sequencing power start-up in a design or to enable application power saving features. A continuous short circuit protection function protects both the load and the device. No electrolytic capacitors are used.

Capable of operating at full output from -40 to +85 degree C, the converter can operate up to +105 degree C with derating.


    Leave a Reply

    You must be logged in to post a comment.

    Latest News from Softei

    This news story is brought to you by, the specialist site dedicated to delivering information about what’s new in the electronics industry, with daily news updates, new products and industry news. To stay up-to-date, register to receive our weekly newsletters and keep yourself informed on the latest technology news and new products from around the globe. Simply click this link to register here: Softei Registration