Test set’s power source and partial discharge in one unit

Megger’s new DAC-30 test and diagnostic system for medium voltage cables is the first test set of its kind with the power source and partial discharge (PD) coupler integrated into a single unit. Because of this unique form of construction, no live parts, other than the cable under test, are accessible during testing, which guarantees the highest possible level of operator safety.

The DAC-30 is a fully isolated DAC (damped AC voltage) partial discharge test set with a peak voltage of 30 kV. It is suitable for performing quality control checks on newly installed cables in line with the IEEE 400.4 standard and for condition monitoring on older cables as an aid to preventing unplanned outages.

A versatile test and diagnostic system for MV cables up to 16 km in length, including the 10, 11 and 20 kV cables commonly found in the UK and Ireland, the DAC-30 identifies, evaluates and locates partial discharge activity in cable insulation and accessories. This activity is a reliable guide to incipient faults and is, therefore, widely regarded as one of the best “early warning” indicators of insulation deterioration, allowing remedial action to be taken before weaknesses progress to complete failure.

The frequency of the DAC-30’s of test voltage is close to normal power frequency. This means that partial discharge activity can be accurately evaluated and will closely reflect the behaviour of the cable in normal operation. In addition, the decaying amplitude of the test voltage makes helps determine the partial discharge inception voltage (PDIV), which is the voltage at which PD activity starts, and the partial discharge extinction voltage (PDEV), which is the voltage at which PD activity stops after the test.

For ease of transportation, the DAC-30 can be split into two modules, each weighing less than 35 kg. These modules contain all the high-voltage components and are controlled by notebook computer running specially developed software. Designed for convenience and ease of use, this software features fully automatic calibration as well as dynamic real-time PD analysis and display of results. Detailed reports can be generated with a single mouse click.

http://www.megger.com

Comments

    Leave a Reply

    You must be logged in to post a comment.

    Latest News from Softei

    This news story is brought to you by softei.com, the specialist site dedicated to delivering information about what’s new in the electronics industry, with daily news updates, new products and industry news. To stay up-to-date, register to receive our weekly newsletters and keep yourself informed on the latest technology news and new products from around the globe. Simply click this link to register here: Softei Registration