ADI integrates MPPT in buck-boost battery charging controller
Charge termination algorithms onboard the LT8491 buck-boost battery charging controller eliminate the need for software or firmware, which reduces design cycle time, says Analog Devices.
The LT8491 buck-boost battery charging controller features maximum power point tracking (MPPT), temperature compensation and I2C interface for telemetry and control. The device operates from input voltages above, below or equal to the regulated battery float voltage.
There are three selectable constant current constant voltage (CC-CV) charging profiles, making it suitable for charging a variety of battery chemistry types including sealed lead acid, gel and flooded cells and Li-Ion. All charge termination algorithms are provided onboard.
The LT8491 operates over a 6.0 to 80V input range and can produce a 1.3V to 80V battery float voltage output using a single inductor with four-switch synchronous rectification. The device is capable of charging currents as high as 10A depending on the choice of external components. The LT8491 may be paralleled with multiple LT8705 (80V buck-boost controller) devices for higher power operation.
The LT8491 can do a sweep of the full operating range of a solar panel, finding the true maximum power point, even in the presence of local maxima points caused by partial shading of the panel, explains ADI. Once the true maximum power point is found, the LT8491 will operate at that point while using a dithering technique to track slow changes in the maximum point. It is by using these methods, the LT8491 can use nearly all the power generated by a solar panel even in non-ideal operating environments.
The LT8491 can perform automatic temperature compensation by sensing an external thermistor thermally coupled to the battery. The I2C interface controls the charger as well as I/O voltage, current and power values. The LT8491 is available in a low profile (0.75mm) 64-pin 7.0 x 11mm QFN package. It is guaranteed for operation from -40 to +125 degrees C.