binder codes M12 connectors for AC and DC applications
S-coded and T-coded power connectors by binder are suitable for power transmission. The two standardised connector types are designed as per DIN EN 610276-2-111 for applications such as motors and drives and for supplying power to AC and DC consumers.
The S-coded connectors of binder’s 814 Series were developed for use in AC supplies up to 630V AC. They have a PE lead and can transmit, in the two-phase or three-phase version, power of up to 7.5kW. The power connectors of the 814 Series are suitable for applications such as AC motors and drives, motor load switches and frequency converters.
The T-coded connectors of binder’s 813 Series are intended for DC voltages up to 63V DC at 12A. They are designed for use as power connectors for fieldbus or Ethernet applications such as Profinet. The power connectors can also be used to supply DC motors and drives or other power-hungry components with up to 750W.
The Series 813 connectors have four gold-plated contacts and the Series 814 plugs have two- and three gold-plated contacts and one pre-mating PE contact. The 813 and 814 connectors are available in both straight and right-angle versions.
The cable connectors of both types are supplied with the M12 interlock as standard. They protect to IP67 and IP68 and are designed for more than 100 mating cycles. Both operate across a wide temperature range of -25 to +85 degrees C.
Both the 813 and 814 Series consist of moulded male cable connectors and female cable jacks. These can be pre-made or supplied ready for assembly. Round and square housings made of metal and plastic are available for panel mounting. The housings can be screw-mounted from the front or back. They can also be connected by the customer and are also available with already connected stranded wire, to meet a variety of installation methods.
binder is a family-owned company, based in Neckarsulm, Germany and with offices in Germany, Switzerland, France, the United Kingdom, Sweden, the Netherlands, China, Singapore and the USA. It specialises in industrial circular connectors and supplies a wide range of high-quality products ideal for all types of industrial applications.
The UK operation is based in Hemel Hempstead and was formed in 2009 to serve a growing UK market for the binder range of industrial circular connectors.
