Power Integrations CAPZero-4 cuts AC-DC standby power
Power Integrations has expanded its CAPZero family of X-capacitor discharge ICs with the launch of CAPZero-4 for industrial and consumer applications.
The CAPZero technology eliminates the continuous power loss associated with the discharge resistor used across an X-capacitor in an AC-DC power supply. The IC disconnects the discharge resistor during normal operation and reconnects it when the equipment is unplugged, allowing the X-capacitor to discharge safely.
According to Power Integrations, CAPZero-4 can reduce system no-load and standby input power by up to 1 W, helping designers meet increasingly stringent standby-power requirements. The device consumes less than 1 mW and can enable zero-watt no-load operation in suitable system designs.
CAPZero-4 also offers an operating temperature range of -40°C to +125°C, supporting industrial, outdoor and other applications exposed to demanding environmental conditions.
Designed for low-power AC-DC applications
CAPZero-4 ICs are designed for appliances, displays, adapters and industrial equipment using AC-DC converters with line-to-neutral input capacitance from 100 nF to 6 μF.
The devices are suited to applications requiring low standby and no-load power, including appliances targeting ErP Lot 6 requirements and power adapters requiring no-load consumption below 300 mW.
By eliminating the losses associated with conventional X-capacitor discharge resistors during normal operation, CAPZero-4 can make more power available to the load in standby mode. Power Integrations says it has shipped more than one billion CAPZero ICs since introducing the technology in 2010.
CAPZero-4 key features
Ultra-low power consumption: less than 0.75 mW at 230 VAC, supporting designs targeting zero no-load power.
Wide operating temperature: -40°C to +125°C for industrial, outdoor and harsh-environment applications.
Drop-in replacement: package and pin compatibility with CAPZero-3 simplifies migration. Designers select the appropriate external resistor values to achieve the required X-capacitor discharge time.
Safety compliance: designs using CAPZero-4 support IEC 60335, EN/IEC 62368-1 (NEMKO), UL 62368-1 and GB 4943.1 (CQC) requirements.


