Power PROFET + 12V switch family offers new mount and enclosure options

Relays and fuses cannot meet the requirements of modern E/E vehicle architectures, asserted Infineon Technologies and partial or complete electrification of the primary and secondary power distribution must be taken into account. The company has launched low Ohmic high side switches in a TO-leadless package, the Power PROFET™ + 12V switch family.

The switches allow for new mounting locations and new enclosure options, enabling the next generation of decentralised power architectures with high efficiency. There are two variants: the BTS50005-1LUA with an on-resistance (RDSon) of 0.6 mOhm and the BTS50010-1LUA with an RDSon of 1.0 mOhm for lowest power losses. They are designed to control high current applications, especially in hot cabin and engine compartment environments for demanding high inrush currents, such as in heaters, pumps and fans. They provide more than 1,000,000 switching cycles compared to, for example, in average 200,000 switching cycles of a relay.

The switches can replace electromechanical relays, fuses and discrete circuits in power distribution boxes and other applications up to 65A in a 12V electrical system. The switches offer built-in protection and diagnostic functions, such as short circuit, over-current and over-temperature protection. They provide a fault signal via the diagnosis enable pin to a connected microcontroller for advanced diagnosis in power distribution modules. They are robust, offer protection and diagnosis features to improve the reliability of the entire vehicle by preventing failure modes in the power board net.

The smart power switches are housed in an eight-pin TO leadless package, reducing the footprint by 23 per cent compared to D2PAK while providing similar thermal performance. The accuracy of the load current sense has been improved down to five per cent and can be evaluated by reading an analogue voltage on the IS pin.

In addition, the switch family is PRO-SIL ISO 26262-ready and comes with a safety application note supporting the evaluation of hardware elements according to ISO 26262.

To enable easy design-in process of Power PROFET™ +12V devices, the family is integrated into the Infineon Smart Power Switches Intrinsic Fuse Tool and the Infineon Smart Power Switches kILIS Tool, both available in the Infineon Developer Center. The Smart Power Switches Intrinsic Fuse tool allows to calculate the intrinsic fusing characteristic based on the embedded overtemperature protection of the respective selected product under certain boundary conditions. The kILIS tool is used for calculating and visualising the range of the sense current for specific load currents on the respective selected product, taking the kILIS rate, sense resistor and ADC tolerances into account.

The Power PROFET + 12V switches BTS50005-1LUA and BTS50010-1LUA are in production. An Arduino Shield (BOARD BTS50005-1LUA) is also available.

Infineon added that it will expand the family with devices for 24V and 48V power net. Samples are available on request.

http://www.infineon.com/powerprofet

Latest News from Softei

This news story is brought to you by softei.com, the specialist site dedicated to delivering information about what’s new in the electronics industry, with daily news updates, new products and industry news. To stay up-to-date, register to receive our weekly newsletters and keep yourself informed on the latest technology news and new products from around the globe. Simply click this link to register here: Softei Registration