Toshiba introduces automotive photocoupler with adjustable MOSFET turn-off time
Toshiba Electronics has introduced the TLX9909, a photovoltaic-output photocoupler that allows engineers to adjust the turn-off time of external high-voltage power MOSFETs. Designed for automotive solid-state relay (SSR) applications, including battery management systems (BMS), on-board chargers (OBCs) and inverter units, the device provides greater flexibility in MOSFET gate control circuit design.
As automotive manufacturers increasingly replace mechanical relays with semiconductor-based switching solutions, solid-state relays offer an alternative without moving contacts, eliminating the associated mechanical wear. However, achieving the required switching characteristics while keeping circuit complexity and component count under control remains an important design consideration.
The TLX9909 uses a photodiode array to generate the voltage needed to drive an external MOSFET gate. Light from the input-side LED is converted into an electrical output, removing the need for a separate secondary-side power supply or charge-pump circuit. This can help reduce component count and circuit size.
Unlike Toshiba’s TLX9910, which incorporates an integrated gate discharge control circuit, the TLX9909 allows engineers to configure an external discharge circuit. This makes it possible to adjust MOSFET turn-off time to suit the selected device and application requirements.
The TLX9909 provides a minimum open-circuit output voltage (VOC) of 13.5V at an input forward current of 10mA and an ambient temperature of 25°C, matching the specification of the TLX9910. This is higher than the 7V minimum specified for Toshiba’s TLX9905 and TLX9906, allowing the TLX9909 to drive a wider range of high-voltage power MOSFETs. Its minimum short-circuit output current is 8µA under the same test conditions.
When combined with an external high-voltage power MOSFET, the photocoupler can be used to implement high-voltage, high-current switching circuits that may be difficult to realise with photorelays containing integrated MOSFETs. Designers can select the TLX9909’s externally configurable discharge circuit or the TLX9910’s integrated approach, depending on their requirements for switching control and circuit complexity.
The TLX9909 complies with the AEC-Q101 automotive qualification standard and operates over a temperature range of -40°C to +125°C (absolute maximum ratings). It provides a minimum isolation voltage of 3750Vrms and is housed in a four-pin SO6 package measuring 3.7 × 7.0 × 2.1mm (typical).
toshiba-tlx9909-automotive-photocoupler


