Yokogawa releases new AC/DC split core current sensors

Automotive and electrified vehicle (xEV) validation requires that measurements take place post-assembly. At this stage, the space around components is limited, and cables cannot be cut. While through-hole sensors may offer greater accuracy, they require wires to pass through their central aperture. This creates serious logistical installation and removal hurdles in late-stage production testing. Split core current sensors, on the other hand, readily meet these requirements as they clamp directly onto wires. Given that engineers typically have to install and remove sensors repeatedly as they progress through test phases and switch between waveform and power analysis, split core current sensors use a far more practical installation method. Lighter, more compact vehicle architectures have only made conditions more challenging, limiting accessibility for sensors sized for 1000 A, like the preceding CT1000S, particularly for applications at lower current ratings. And conventional split core current sensors do not meet the required accuracy ratings due to challenges introduced by their clamp on design.

Yokogawa Test & Measurement developed the CT500SA and CT200SA to address these challenges directly. Delivering accuracy ratings comparable to through-hole sensors, wide frequency bandwidth, and the convenience of split core installation, both sensors deliver compact measurement solutions ideal for tight spaces and a wide range of applications, from product development to real-world testing.

Main Features
1. Compact measurement in tight spaces
The main sensor unit of both devices measures a compact 110mm width × 62mm height × 25mm depth, ideal for space-constrained test environments. Each features a single unlock-and-open button for one-handed clamp-on installation, while the body includes both an M4 screw hole and a cable tie slot to secure the sensor in place – directly improving measurement repeatability as outputs are sensitive to positioning.

2. High accuracy, wide bandwidth, split core design
The CT500SA and CT200SA guarantee accuracy of ±0.1% from -40℃ to 85℃. Within 23±5℃ range this improves further still, achieving a peak accuracy of ±0.09% of reading +0.01% of full scale. Both models guarantee accuracy one order of magnitude higher than that of conventional current sensors, equivalent to through-hole types but with the convenience of clamp-on installation.

Available frequency bandwidths differ between the two models. The CT500SA delivers a frequency bandwidth of 500 kHz (−3 dB), while the CT200SA extends to 1 MHz (−3 dB). The CT200SA and CT500SA can also measure switching frequencies, used for motor inverter validation and requiring wideband measurement. Both models hold a phase accuracy of ±0.1° (0.1Hz ≦ f ≦ 1kHz).

3. Versatile measurements
Current sensors are typically compatible with only one type of instrument, whether a power analyser or waveform measurement instrument. The CT500SA and CT200SA can connect to both directly without the need for a conversion connector or supporting accessory. In addition to the time and labor savings from eliminating sensor swaps and reduced equipment costs, measuring identical signals improves reliability and removes the need to synchronise data.

tmi.yokogawa.com

Latest News from Softei

This news story is brought to you by softei.com, the specialist site dedicated to delivering information about what’s new in the electronics industry, with daily news updates, new products and industry news. To stay up-to-date, register to receive our weekly newsletters and keep yourself informed on the latest technology news and new products from around the globe. Simply click this link to register here: Softei Registration