Processor AMC arrives with Layerscape LX2160A and support for SRIO/PCIe
The AMC705 is VadaTech’s Processor AMC based on the NXP Layerscape LX2160A in a single-module, full-size AMC form factor based on the AMC.1, AMC.2 and the AMC.4 specifications.
The LX2160A provides 16 Cortex- A72 cores with 8 MB platform cache and dual 64-bit memory controllers. The front panel on the module provides GbE via a RJ-45 connector and 100GbE/40GbE/Quad-10GbE via a QSFP28 connector.
The AMC705 offers dual 10/1GbE to the rear per AMC.2 specification on Ports 0 and 1. Ports 0 and 1 will support 10G operation but this is outside the AMC standard MCH with 10G on ports 0/1 or point to point on backplane if required.
The 10GbE support on ports 0 and 1 allows 40GbE only on the front panel. If 100GbE is required ports 0 and 1 must run at 1GbE and Ports 4-7 can be configured as SRIO or PCIe.
The module also has an option for PCIe on port 8-11 and when ports 8-11 are routed, the module can be configured as dual PCIe x4 or single x8.
The two 64-bit wide memory banks on the module provide up to 16 GB of DDR4 with ECC.
VadaTech provides embedded computing solutions from board-level products, chassis-level platforms, to configurable application-ready systems
With a focus on AdvancedTCA, MicroTCA, VPX and PCIe solutions, the company offers electrical, mechanical, software, and system-level expertise to provide customised commercial or rugged computing solutions to meet complex customer requirements. VadaTech also offers specialised product solutions for VME, CompactPCI, and other architectures.
A member of PICMG and VITA, VadaTech has headquarters, design and manufacturing facilities in Henderson, Nevada with design, support and sales offices in Europe and Asia Pacific.
