Wall mounting kit secures Evotec enclosures

Enclosures can be quickly clipped and unclipped or secured in place using the wall kit by OKW. The suspension element for the Evotec designer table-top enclosures, enables them to be wall-mounted.

The wall kit makes the tough and ergonomic Evotec suitable for access control, says OKW. Other applications include measurement and control engineering, IT, medical, laboratory and environmental technology.

The suspension element is designed for Evotec but will suit any small plastic enclosure with a flat base. Each kit comprises two parts: an adapter attached to the enclosure and a holder fitted to the wall. The adapter (and enclosure) can then be clipped to the wall holder.

The adapter is attached to the base of the enclosure using four tamperproof Torx stainless steel screws, also supplied. Four 3.5mm diameter boreholes are required. The holder is fitted to the wall using four screws. The holes in the holder allow a degree of adjustment to speed up installation.

Once clipped into place, the adapter and enclosure can be easily unclipped again or secured with the two screws supplied in the kit, offering additional protection against removal.

Both the adapter (106 x 75mm) and the holder are moulded from UV-stable ASA+PC-FR (UL 94 V-0).

The standard colour is off-white (RAL 9002) although custom colours are available on request.

Other accessories for Evotec include an IP 65 seal and self-tapping screws for installing PCBs.

https://www.okw.co.uk/en/Plastic-enclosures/Evotec.htm